-
Relook 400, cant detect in PC
Hi Guys,
i have this relook 400 working, i put it in cupboard since bought ultra plus HD.
today i took this out to put it another room, it boots and then sits on "USB UPGRADE" blue light blinks for few mins and thats it.
i installed Flash tool 1.0.2 restarted PC, but PC is not ready to detect this box at all.
i have tried one pc with windows vista 32 bit
2 other pcs with win 7 64 bit but no luck at all.
i have also tried to remove hdd but no difference.
also tried 3 different USB cables, and different USB ports on all three pcs, but no luck.
any idea whats missing here, thanks.
is there a work around to skip this "USB UPGRADE" bit and just load everything the way it was working before???
-
What image were you running? Does it have a Hard Disk?
I was running highland or something that.
Yes it does have a hdd in it.
I see you have asked the same question on denktenk. The easiest way to diagnose the issue is buy connecting to the serial port. It sounds like you may have an issue either with the hard disk or the boot loader.
You may be able to get going by a reflash:
Follow ori's instructions, & re-install just the bootloader. If that doesn't help, re-install the complete image. After that, your only option is to connect to the serial port & debug.
i'm organizing a null modem serial cable over the weekend to try ref lashing it with that instead of USB. USB is not responding at all no matter what i do.
i have that instructions sheet with me to follow. on startup it shows linux screen on tv with boot loader information, but does not go any further from there.
I think you need to install a usb driver on the PC so it can see it ...been a while
I believe usb drivers are installed with flash tool.
Could not locate anyother drivers, any hints???
Yes, the drivers are installed when you install flash tool.
thanks to ori on dektenk, it was power switch on front required a bit of cleaning. all working again, no need to flashing or anything.
thanks guys for your feedback and advise here too.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks