set lnb up as universal - 9750/10600 , you may need to adjust lnb shew as well to get best signal.
Default HELP with universal lnb for strong 4653x
i just bought a fortec star fsku-v lnb for my strong 4653x i had a single lnb on by dish before
can anybody help me with the setting for this lnb i cant seem to get it to work
the dish is directed to c1
im not getting the green bars on the settings page thay are red
what shoud be the lnb freq?
on the box it has
Band input(ghz) lo(GHZ) gain v
low 10.7-11.7 9.75 56 o.7
high 11.7-12.75 10.6 56 0.7
what am i doing wrong
Look Here -> |
set lnb up as universal - 9750/10600 , you may need to adjust lnb shew as well to get best signal.
before i adjust the skew are the bars red and then they turn green when i have the best signal
Possibly, but more likely if you have the LNB LO setting correct and ensure you have the LNB POWER set to ON, you should see the green bars.
If all the above are correct and you still have no signal, then your dish/LNB is probably out of alignment.
What are you trying to receive on C1 and with what size dish?
optus d2 or b3 ,im pretty sure the dish is out of alingment now from where i has it on c1
Bookmarks