For anyone who may have original software in a supernet box. By this I mean when you are watching a program they talk out of sinc while watching a program.Also the program guide is very dark and hard to read. This will fix this problem if anyone needs. Requirments
Turn box off
Null modem cable
To use software.
open exe file
click on file
click on open
load sdl file.
click on download
click on dowload loader
then when it says waiting for sign from boot monitor then turn on box and wait about 3 minutes for updated software.
Last edited by hardy1963; 26-05-08 at 08:52 PM. Reason: left part of link out
Look Here -> |
Sorry it`s for the sought after 488a satellite box . I had received a few requests for software from previous post on Austech so I decided to upload it
o.k thanks,
what firmware version is it and what CA Module is it?
also second link is dead
Chief
Thanks Hardy,
Do you have a link for where you got this sw from?
Do you know if this will upgrade a 488 to 488A? not much on the net about these decoders.
Cheers
It is official supernet software not something that I put together or somebody else. Try it on a 488 box if you wish. If you have the problem that I said in the original post then I suspect this will fix it. Also the 2nd link doe`s now work if you see I fixed the link
Will the supernet 488 AU the new G cards?
does this fix sound not turning off when box is turned off?
Thanks MM
you seem to know a bit about the supernet 488, would you know what the installer code is or if you can reset it please.
Bookmarks