try looking for supernet 488 they the same box ,just rebadged.good luck looking!
need some help trying to find updated firmware for the space sp480, tryed to google but no success.
Look Here -> |
try looking for supernet 488 they the same box ,just rebadged.good luck looking!
why do you want to upgrade when they work fine?
if you must there was another member that posted the supernet 488a
loader and sdl firmware
haven't tried it yet
Chief
thanks guys for your help, reason why i was looking for upgraded firmware is that i installed the firmware for the supernet 488a hardy1963 supplyed in his post, i was having sync and visual problems on my space sp480. but after the software update finished and the box reset i was getting static sound from box and the screen fades in then out and there is scrolling. i think i stuffed the box, ohh well its all good
thanks again
scrolling could be that the box is set to incorrect tv system like pal / ntsc
play around with those settings if not i try and make back up of my space firmware
Chief
tryed the pal/ntsc settings no luck at all.
thanks again for help
STB - Loader software shows
** Feed_back = 0x80000 etc.. for 4 mins when booting to upload the f/w..
The display on the box keeps changing between random numbers like 380, 200, 106 etc..
any idea?
it seems to throw an error before hand.. the 2nd line of the load shows 'A-ERR' which i assume is some sort of Error..
I think the problem may be that these receivers use a different flash which the loader doesnt support.
Hey Guys,
I ma seeing the same error on a space sp480. i agree looks like it's seeing the wrong start address in the firmware. Anybody seen a later loader than v4 ?
the 1 that hangs has already been updated ,the firmware was only released to get rid off the e17 problem, i got the firmware direct from importer a few months ago it does nothing else.
the space 480 that wont upgrade needs a eeprom changed and reflashed the only people that can do this is the importer
Bookmarks