I have had no problem with 1.13 and 1.17 in 2 different 4658x boxes the best way to do it is to down load the loader program from the Strong site and the latest 1.17 firmware. Also ya need a RS232 cable to load it into the box.
Can anyone guide me to the best CS firmware for the Strong 4658X, I've tried a few but they come up with "Invalid Smartcard" when I insert my season, and I'm pretty sure they are contacting correctly in the CI socket.
Look Here -> |
I have had no problem with 1.13 and 1.17 in 2 different 4658x boxes the best way to do it is to down load the loader program from the Strong site and the latest 1.17 firmware. Also ya need a RS232 cable to load it into the box.
I always use my flash drive to upload the firmware. Never had a problem.
Cheers, Saintaholic
I have had good and bad experiances with the flash drive version but never with a R232. Also the RS232 with a loader program is the only way to fix a flash drive that has gone bad.
Problem when the program goes to send a reset to the season, with the ATR details, goes to send and it reports IRD Reset LO.
Any ideas?
Beats me I just plug in the RS232 cable to my lappy and the Strong start up the loader program, click Browse, highlight the latest firmware, click connect and away it goes. I have done to several 4658x and 4653x boxes without any problems the only time there has been a problem was when using a USB memory stick some times.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
No, no, this is cardsharing with a strong, not loading firmware.
Bookmarks