So was it that there wasn't enough transponder frequensies set in the box to run an auto scan?
Hi All Im setting up my strong 4658x and im haven troubles scanning channels,i seem to get around 10 channels and scrambled with it green and the rest are red saying no signal any one know whats going with it. thanks
All fixed, done a blind scan.always happens after ya put a post up .
Look Here -> |
So was it that there wasn't enough transponder frequensies set in the box to run an auto scan?
Hi im not sure just done above but all are there now. actually the problem im have is im trying to find pas8 for select tv but just cant seem to get it on my strong box i take it that pas 8 is intelsat 8/ku in the menu of the strong box and should be just below c1?? any tips much apprectated.knew i should have bought my hummie with me instead of the strong.
Yes PAS8 has changed it's name to Intelsat 8 and there is 2 in the menue of the strong and yes you need Intelsat 8/ku as the other I8 is for C band. but for you to get I8 as well as C1 you would have to have more than one LNB and a Diseqc, is that what you have?
No jut a strong single lnb after pas 8 only,i deleted all c1 station went and added pas8 in menu relined dish thinking i was on pas8 done a blind scan and got all my c1 stations back so looks like i wasnt on the pas8 sat.im useing a sat finder to just cant pinpoint the sucker atm.
Mark your bracket on your pole as well as mark you elevation. You need to lower the elevation of the dish by a few deg and turn the dish around the pole approx 4-5 mm. If you can see your box (with a signal quality screen up)while doing the adjustments while using the sat finder also all the better. Let us know how you go.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
if im sitting behind the dish which way to turn left or right of c1?
k thanks ill give it another shot,this box is new this is the first time i have used it has got the original firmware as ive had the box for 8 months should i upload the lastest and would it make a diffrence
What channels should be comming up when i do the right scan,is there a select channel that appears when ya scanning right?this is the setup im trying on my box
sat-intelsat ku/8
lnb power-on
lnb type -universal
lnb ferq-10700-11300
22khz auto
dise-off
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
must be universal as im picking up and storing c1 channels ok and the bar is green with good signal and quality
its a strong lnb
ku-band single lnbf
input 11.7-12.75 ghz
output 1000-2050 mhz
l.o 10.7 ghz
Ok found the sucker had settins wrong should have been
10700 single lnb
and auto scan done the trick.thank f...k just about had enough of the dam thing thanks guys for your help.
thanks leroy just bet me to the post lol thanks.
never even thought to have a look earlier to see what lnb it was,always had the uni ones but anyway always pay to check,least i still have some hair left.
Bookmarks