I can't say I have heard of any card higher than the 5.3 working in IRSerever, but i could be wrong
Hi,
Multichoice South Africa is currently rolling out new Irdeto Version Premium v6 cards to all of their more than 4 Million subscribers in batches and my v5.3 Zetta card has been swopped out for one of these new cards.
The v5.3 card worked flawlessly in IRServer 4.3 but the new v6 card always receives the following from the card: The Tweak Keys does change from time to time in the tweak key tab. All the cards information is read and displayed correctly in IRServer 4.3.
The card did not miss an update as when I place the card in the original decoder all of the channels clear instantly. I have left the card in the decoder overnight and tried again in IRServer but the received from card response stays 01 05 90 00 00 00 02 00 A9 :
The MK Box remains Orange
The PK Box remains Orange
The TK Box remains Orange
The CK Box changes to Red
The Tweak Keys Changes
The card is also not paired with the decoder as the decoder is an older model and does not support secure silicone pairing.
Here is an extract from my ACamd log:
0: historical: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
0: historical: 'IRDETO ACS V6.0
Blocked 2 same messages...
18:52:46.875: 0: atr checksum ok
18:52:46.875: 0: indicated wwt(T0)=1500 ms, bwt(T1)=1600 ms (at 3.5712 MHz)
18:52:46.875: 0: Init Irdeto card
18:52:46.875: COM3: set serial options: 5760,SM_8N2
18:52:46.968: ACS Version 0006, CAID 0606, CoCo ZAF
18:52:47.062: ASCII serial xxxxxxxxxxxxx Q
18:52:47.140: Providers: 4 HEX Serial: xxxxxx HEX Base: 11
18:52:47.484: didn't find Irdeto card specific certificate, falling back to default
18:52:47.484: didn't find default Irdeto certificate, please add one
18:52:47.484: now switch to Plain
18:52:47.656: 0: unknown (status: 00 92)
18:52:47.656: card didn't give a proper reply (buggy RSA unit?), trying to continue...
18:52:47.921: 0: CAM string rejected (status: 57 00)
18:52:47.921: camkey error"
Any help will be greatly appreciated.
Regards
Look Here -> |
I can't say I have heard of any card higher than the 5.3 working in IRSerever, but i could be wrong
When you do things right, people won't be sure that you have done anything at all
Same problem here , Tried oscam , but no luck.
Hi
For me its almost same, i use version 3.2 and in The TK Box goes green for me, may be i can help if u can email me the latest version of Ir server.
Thanks
Dead end it seems. no tweak keys no dstv. Back to using the old, ugly original pvr.
Hi,
It looks like no choice have started their final assault of disconnecting clients still using their ver 4 / 5 cards to get them to swop out to the premium card.
The new cards have the latest bells and whistles, which i assume includes CW encryption between card / cam.
Nothing is working on these cards, from oscam (tweaked) / cccam / IRser . Don'
t know if it's worth logging the card. Not sure which ir deto customers around the world have switched to the new card, besides No choice South Africa. The more the better, as more information will then become available on the new cards.
Regards
happydaddy (04-07-12),LeroyPatrol (02-07-12),OSIRUS (14-07-12),weirdo (10-07-12)
It is a hobby so mileage varies
Loving IPTV with XBMC and android M8
Join in the XBMCHUB community and visit me at http://tvaddons.ag/
Hi,
DS TV have two beams in Africa. The 68.5E Ku beam covering Southern Africa and the 36E Ku beam covering the rest of Africa, Sub Saharan Africa to be exact.
On the 68.5 beam, t.w.e.a.k keys were implemented by the provider early this year. Not sure if surflock has been implemented, or if there is a need, with fewer and fewer people still on the ver 4 /5 cards.
Don't know what's happening on the 36E beam, and whether tweak keys and surflock have been implemented. Not sure though whether the 36E beam is still shareable. Some West African forums, have people selling C lines, but difficult to tell whether original or scam. Also alot of talk about Avatar and other dongles working, as well as Yellow Dragon Cards. But again it's all heresay.
Time to get a Roku Media streaming device, and watch streamed channels. Only problem is Broadband Internet not to great in Africa. Some people still use dial up.
Cheers
LeroyPatrol (12-07-12),OSIRUS (14-07-12),weirdo (12-07-12)
hi,
from credible sources ds**v married are being shared,but do not know which latest technology is being used now,thats a top secret among some few top satellite guys here in africa.But i think there is always a solution to everything,bcos everything is possible with hard work and determination.
anyway i will be sniffing my nose round to inform the house of any new developments
Edit: Do NOT make requests such as that on this site or you will be removed - Admin
DSTV still has unmarried cards , all you need is just the correct camkey and data as well tweak function which you must know already ...
Even DSTV HD Cards ( unpaired ) can be found around !
Regards
best4less (26-07-12)
Any news about irdeto v6
Not that i'm aware of (publicly). There could be some non-public release, but difficult to say.
Maybe we'll see a new card, the likes of the Gamma appear sooner or later
Regards
Guys need some help
Irserver working great with the tweaks on 0606, but everyday i need to insert into the original decoder for update and then back into irserver. Is there any work around for this? I am trying oscam tweaked but i dont know how to get box key and rsa key. Any help?
Thanks
Last edited by happydaddy; 12-09-12 at 01:25 AM.
surflock now activated on DSTV
marzoid (20-09-12)
Hello to everyone. I have one V6 premium card, unmarried, patch level 2. DSTV already activated the surflock, but the problem i am experiencing is that it only works for a few hours in tweaked oscam and the stops. I guess is missing updates, because i have to put in original receiver, and then it works back in oscam for a few hours again. Did anyone experienced this?? and came up with a possible solution??
Regards
You will find Tweaked Oscam blocks pretty much everything a
DISABLE EMM : yes
this would stop your card from getting it's updates if you have this in CCcam.cfg, thats if you are using CCcam to
keep your card updated
When you do things right, people won't be sure that you have done anything at all
Could be surf lock kicking in but usually that happens after around 20mins.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
any fix yet??
rumours has it they use 3 PmK now..... it used to be 2..
hi
please help me to work card DSTV
I neeed version oscam And oscam file
Bookmarks