Hey, bought a serial programmer from sattronics a couple of weeks ago and cant get it to program up a Pl1 (sellers)
It will do other cards fine in gup but cant get the atr on the sellers.
The card is fine as ive checked it with my old multiprog.
Have tried contacting sattronics about this but no reply.
Have tried changing all the jumper settings phoenix/smartmouse, 3.57/6mhz nothing seems to work.
Has anyone else had this problem with the same programmer?
Link:
Look Here -> |
I once had a card that would read ATR OK in the Jaycar Programmer
but would not get an ATR in the Cas3 + programmer
just another thought about it
Cheers
Become a Premium Member and support the Austech Forum
what error are you getting with GUP
you cannot program a PL1 card with GUP unless you convert the bin to a OS file , you need to use loadme
oblada , life goes on , blah
3.57mhz is what you should have the programmer set to.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I only want to add string to card.. not actually program an os to it.
The programmer obviously doesnt like that type of card as my other programmer works fine with gup.
Have you tried a different PL1 ? or you only got the one ??
When you do things right, people won't be sure that you have done anything at all
OSIRUS (18-05-12)
Just got the 1
Bookmarks