you may need to send it an emk. I'd be leaving it in the box overnight on a horizontally polarised channel like halmark, fox etc and see how it goes. Also make sure you are using the latest firmware from the Strong website.
Leroy
I have a whitey 2 that was working but has been out of the box for a few weeks and is now not working. Is it just a matter of waiting for it to update or do they have a problem being out for that long. Its in a strong 4653x
Look Here -> |
you may need to send it an emk. I'd be leaving it in the box overnight on a horizontally polarised channel like halmark, fox etc and see how it goes. Also make sure you are using the latest firmware from the Strong website.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I try that
thanks leroy
ur not supposed to leave em out of a box for more den 24hours
I have left them out for many days at a time then over night it will be up again in the strong
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
Still not up after about 36 hours but I'm going away for a week tomorrow, hopefully it will be going then, thats if the kids don't unplug it and plug in their Wii again.
Was still not going when I got back (over 1 week) but then plug it into a mates openbox x810 and it fired up in a couple of minutes. so all is well now
It is version 117. Can't understand why it didn't get it going, but now I have it start everything is fine.
Try reloading the firmware again I have had the same trouble in the past when using the USB method but if it is done with a RS232 cable it stays good.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
It was the older 117. I've put in the new one now and all is going well. Thanks again for the help
Bookmarks