funcard..........
Hi all,
looking for a bit of help with a card ..
open platform (on front with face pic)
"EVIL" etched in the chip area
purple rear color with 001082925-1001 AT90(P1)
Is this a silver ??
1 of the only programs i can find to read the data is Card Wizard
& in it it says info : AuGV03
does this mean this card is programmed as Ausgold ???
if so what program should I be using to read / edit card details please..
Look Here -> |
funcard..........
icprog
fmcard
ponyprog if its a blank
if you're recycling a Funcard, skip the IC-Prog programming step and just
use FMCard to reprogram the data and keys.
For Silver, Emerald and Fun use the same file: GEmerald.crd
Have exactly the same card herecomes up as, Pic 16F877 found. EEprom 24C64 found.with auto detect in mp3.4 & Elvis so I'd say your right, a silver with Ausgold Version 3 or year 03 .Have a look for Ausgold Card Writer exe may be able to read it with that cheers h5open platform (on front with face pic)
"EVIL" etched in the chip area
purple rear color with 001082925-1001 AT90(P1)
just use fmcard
if it has been preprogrammed
drag your .CRD file containing keys into the bottom box and click send
Many thanks aaeon.1
Software written for Elvis programmer
Just wondering if its possible to send a new ATR to the cards..
silvers read as not ATR.. so wont work.. (FM card)
a few others wont read as they dont have ATR either..
still looking for a reall multipurpose program that will read all
What is the cause of " Unknown ATR " its on a silver ??
how do i fix the problems please anyone ???
if the card works then the problem is your programer/program settings
or cable
FM card doesnt work very well with XP try win 98
Don't worry, it only seems kinky the first time.
Yeah well from the hassles i started with
everything lately is all done under 98se...
my question is though...
WHY cant I give it a new ATR..
OR how do i give it a new ATR.. after that it should be working again..
can pull the ATR from my Au*ora card if need be just need to know if it can be done & how / what to do it..
the atr can be changed but you need to know the code on the card
you can try a few programs to write some details to maybe determine the code
or you could read the card with icprog and edit the hex file but it will more than likley be protected
or you can just reprogram and enter your details
Bookmarks