Connecting a Vimicro tablet to Win 7

[viewer]

I was having a problem connecting my new Vimicro tablet to the pc. The pc would not recognise it.

I could get the windows sound that it had found it, but it would not display anything.

I read that I should go into devices, and it should show up in there, but would probably be in yellow, showing that there were no drivers for it.

That was right, and it showed as a Tablet BC 1003

Again that was right.

I then went looking for a driver

I then googled more on a forum I had joined


and found this post........

After following the instructions, I am now successful in transferring files directly from Win 7 to the tablet.

I hope this may help anyone in the same situation in the future.


Usb drivers required

Hi, all

Looking for some usb drivers so i can attach :


0.2" Tablet PC Flytouch Superpad 7 Android 4.0.4 ICS Ice Cream Sandwich 1GB DDR3 latest
Allwinner CPU processor 1.2 - 1.5 GHZ Massive 20 GB

Model BC1003

To my PC running Windows 7 Ultimate 64bit.

Been looking for a few days on Google etc, but no joy.

Any help you can supply would be very much appreciated.

Many thanks
Bilbo.

Hi Bilbo, I have the solution for your problem, because I had the same problem, and I have the same tablet like you. I was looking for the solution,
but I couldn't find it. But I find the solution for myself.
First unplug the usb cable from your tablet and your computer, then go to the settings in your tablet Developer options - and UNCHECK USB Debugging,
ok. Now turn off your tablet, then turn on again and connect the USB cable on your tablet first, then in your computer and you will receive a
message on your tablet for turn on the usb connection, and that's it.