Solution 16 keypads and faults

[fire777]

Hi Guys

2 things

What keypads can you mix with a solution 16/safe com 8zone as mine is dead ie does CROW power wave keypad or does it have to be a Bosch keypad

Fault light from comms fail anyway to clear look though programming manuel but cant find how to stop comms. it is not connected to phone line.

many Thanks

Gary
GC Tech

[watchdog]

You are going to have to use a Bosch codepad. Before you write it off take it off the wall & wire it direct to the codepad input on the board - it may be a cable problem.

If you have the programming code & programming book then look at Loc 663 for dialler disable

[fire777]

Main problem is there is no sound from keypad tried turing it up and stuff
and cant hear it.
annoys the hell out of wife as she cant count arm time and it sets off

any one out there got a second hand bosch or solution 16 keypad for sale

Thanks for your help

Gary

[redstorm]

Solution 16 dont beep during the exit delay. Its silent until the last 2 seconds when it gives one beep.

Not sure if it can be changed. Never been asked.

Someone on here will know and tell you how if it can.