They are not really difficult to do. Just follow the instructions in the following link. If you have specific questions ask away.
Hi all, I`m new to this and I would like help if possible.
I have a MS28 and would like to flash it. I`m asking for help here as I dont want to stuff it.
Any help/pointers will be greatly helpful and appreciated.
What programs/files are needed?
Look Here -> |
They are not really difficult to do. Just follow the instructions in the following link. If you have specific questions ask away.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Thanks cwispy, just gonna have somthing to eat then I`ll get stuck into some reading.
Thanks dude, much appreciated.
Anyone have any links to any tuts using NVIDIA chipset?
All the tuts I have seen are for the VIA chipsets.
You can use the same instructions as that doc, but you will want to use the VCC method which involves removing a resistor from the board and putting a switch to its points temporarily.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Pickup a VIA VT 6421A PCI SATA Card off Ebay they pretty cheap
already did order 1 off e-bay today but will have to wait a week till i receive it.
Looks like i`m gonna have to get my old pc out as alot of programs dont seem to like this 64bit one.
Will read more and maybe give it a try next weekend if I have some spare time and feel confident.
You should be flashing it from dos using a bootable usb key or similar, or are you refering to the programs for creating the bootable usb?
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
I`m refering to the programs for creating the bootable usb.
Cool. Good luck. I had heard that they dont like 64bit OS's. No problems on almost any 32 bit OS however.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
here is the error that im getting with iPrep
Sorry about the big pic but thats the only size that ppl will be able to read the error.
Can someone please help me with this.
What OS are you using,as I can run iprep in either 32 and 64 bit vista with no probs
Do you have .NET framework v2 installed? Its required for iPrep
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Yeah I had to install .NET framework v2 to fire up iPrep.
os xp64bit and tried xp sp1 with the same error.
I dont have the via card yet. So I haven`t got the option to select that yet. Maybe thats the prob. Pretty much all I can select is NVIDIA. Just want to see if I can program the usb stick.
Have u tried uninstall then install
Actually looking at the error it suggests that you are trying to write to your C: drive. Did you select the usb key as the destination?
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Min, are you using the Iprep version that installs? I got the same error with the one I got off xbins and then ended up using a setup version that installs and that fixed the problem.
I gotta go to work now but I`ll try more tommorrow.
Also i have un-installed and re-installed with the same outcome.
Bookmarks