Help! Trying to Flash MS25 with iXtreme

[smithster]

Hi guys, I have a MS25 that I have previously flashed with the xtreme firmware and I'm now trying to flash it with the iXtreme firmware. I'm using the iPrep program. Everything seems to go ok until I get to where I have to choose the device and shows it as XTREME, however when I select it the next line its shows Port: aXXX, Master/Slave: aX and the cursor moves to the next line and just sits there flashing.

I've tried with the USB and hardrive and getting the same result.

Any ideas what I'm missing?

[shai12]

yeh you might have to do the MS28 trick,ok when you get to the select port shutdown the xbox for 10-15 secs and select your port which is usually be number 1 and after 10-15 secs turn the xbox on then it should read or flash depending the option you chose

[smithster]

Cheers m8, that did the trick. I was doing it back to front.

Much appreciated