I'm just on my way out and will post a more detailed response later, unless someone beats me to it.
All of the B series Optus sats were replaced many years ago, so your info is very outdated.
IS19 has recently replaced IS8, so your receivers may still show IS8 in the name.
The standard size dish used for Foxtel/Austar is 65cm....... larger dishes provide a stronger signal.
The Sharp LNB's used by Foxtel/Austar have an LO of 10700 (all four outputs of your quad LNB are the same) so you will need to select the correct LNB LO frequency in the decoders..... note the LO of 11300 is different on the other LNB.
Bookmarks