u need a twin output lnb mate... unfortunatley spliting doesnt work
Can I use a 2 way splitter or will I have to run another cable wich wont be fun
Look Here -> |
u need a twin output lnb mate... unfortunatley spliting doesnt work
If everything you want is on the same polarity, then a splitter can work, but, it has more signal loss than a dual LNB and seperate cable runs, and if something changes, then extra cable will need to be run anyway.
If you are talking D1 or Is8 a splitter is fine if C1 or D2 only good if both boxes on horizontal or vertical if you want both you do need a twin LNB
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
Safest option would be a dual output lnb because of the signal loss with a splitter as mick mentioned and also having the freedom to play with diffrent polarity's on seperate receivers.
You would hate to lose your picture during rain regardless of which sat your locked on.
I don’t know what they are all talking about but if you have the boxes with lnb in and lnb out then as long as only one has the voltage on and the other off it’s fine. I myself have 4 boxes running at the same time to keep cards up to date and they work fine.
Cheers Badass
Umm... DUH! That's exactly what we are talking about. It's much the same thing, really.
Thanks Guys
I will try a splitter if it does not work it will have to be a dual lmb and another cable......................................
I need to setup 2 receiver with splitter in between link with 1 c-baqnd LNB to Asiasat3.
Any body confirm me what will be the consequences?
If I use splitter to split signal into 2 stb, would it be their any big loss in signal? plz confirm. Other wise, I can go for Loop-out option from STB. I already have twin-port LNB to feed 2 STBS, this will be third on for PCI card (occational use, Master/slave set-up no problem)
Sorry Mate, You didn't answer my question, Level of signal loss through 'Splitter' option. If significance loss then I shall definitely gor for Loop-out. plz confirm.
Master/slave situation of STBs set-up through IF loop-put give either H or V, Thats I know.
thanks mate, I shall give a try with splitter as well as loop-out option. Let you inform the result.
Bookmarks