timer on
volume down to zero on front panel and keep holding the button down
and hit recall on remote
Hi This had crook convergence chips, and after changing them, the center of screen is good, but need to get into service mode to tweak the edges which are out a bit.
Anyone got a manual or done one of these??
Thanks Oscar
Look Here -> |
timer on
volume down to zero on front panel and keep holding the button down
and hit recall on remote
When you do things right, people won't be sure that you have done anything at all
Get to check 5 for convergence mode and use S-convergence
and mute pip and surround on remote should get you around the screen
When you do things right, people won't be sure that you have done anything at all
Thanks mate .Legend
That got me into option coded setting and check10.
Cant seem to change to check5 to do anything other than change option codes.
All fixed .
Many thanks B4L.Buttons 1, and 2 cycle thru the service modes.
Cheers
I didnt get one.High Country couldnt help.
Give prime a ring .Those guys can be helpful.
Bookmarks