Only a guess but it looks like your are only receiving vert on your LNB.
FBO, Adult are on Vert. Everything else is on Horz.
LNB setting ?
I have spent hours and days and still in trouble, i can only get fb movie channels and the two adult ones, anything else "e37 service anknown" or no signal from a humy 5400z with original firmware, and same channels come up with a strong 4653x . lnb setting is 11300
Can anyone halp me please what do i do wrong?
Look Here -> |
Only a guess but it looks like your are only receiving vert on your LNB.
FBO, Adult are on Vert. Everything else is on Horz.
LNB setting ?
By reading this, you have already given me control over a tiny slice of your mind
That's what i think to but i tried 10300/10300 11700/11700
now is set at 11300/11300 what else whould you suggest me to try? thank you btw.
i like your gfriend btw nice (avatar)
Not sure what the setting is called on the strong. Value should be something like 1 MHz. V/H switch...
By reading this, you have already given me control over a tiny slice of your mind
what about in humax?
Don't know. Don't have one.
My settings for my 10700 LNB is LNB LOF switch 1 MHz
Yours might be different.
By reading this, you have already given me control over a tiny slice of your mind
You Need to adjust your lnb. Looking from the front of dish, turn your lnb so the connection is at 7 O'Clock approx.
joezep u saved me. thank you all good now. u guys are great.
i had it at around 5 now i twisted at around 7 all great. taaa
Did you just get of the roof mate, must be cold up there LOL
When you do things right, people won't be sure that you have done anything at all
didn't even feel it
Today i realised only the channels in vertical i can see not horizontal and when i twist the lnb i see only horizontal channels. in both cases i have good signal strength over 70% in my humy and strong. is there anyway i can fix this so i don't go to my roof every minute?
Go back on the roof, and look at the sticker on the lnb
It should tell you whether it is 12.25Ghz, 10.6, 10.7 etc
Depending on what type it is, dictates what setting you should have in your lnb menu settings of the decoder.
Then go into both lnb settings in your decoders, and tell us what they are set up as in there on C1
Go get that info and report back
its sharp ku band 11.3 gh i couldnt read more the paper its all faded.
its set 11300 in humax 5400 and 11300/11300 in strong. this lnb has worked fine for 6 years or more in both polarities i don't know what is wrong now its raining to tonight i gat to go to the roof again
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
it doesnt matter how much i turn it as i have signal for both in any direction i twist but if i see the horizontal i don't see vertical and if i see vertical i can't see horizontal. in humy it comes up "e37 service error"
Yes...agree with Leroy...check skew, if not, throw on another lnb. If you can't afford a new one, look at the tip/recyclers...usually lots there.
Kristal electronics sell lnb's at a nice cheap price...look in there specials section
It's like one polarizaton is only working.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Bookmarks