Haven't got on to lift programming as yet.... isn't there a licensing requirement for that?
try sending a PM to user seems to know a fair bit about the integriti and helped me out in another thread
Hi guys
Am just about to upgrade a Concept 4000 system to Integriti. Most of the programming seems straight forward but Im having trouble sorting out the lift programming. On the 4000 there is a single door controller and an 8 way relay card/lift card fitted to expander 1 which control the floor buttons. In the 4000 programming you have to mention what Aux is the first floor and it assigns the rest in order.. Cant see how to do this in integrity as it doesnt ask for the first Aux. Any ideas
Cheers
Look Here -> |
Haven't got on to lift programming as yet.... isn't there a licensing requirement for that?
try sending a PM to user seems to know a fair bit about the integriti and helped me out in another thread
Thank you
Have worked it out. Thanks anyway
Can you shine any light on it to help us out later down the track?
Is it the same or similar to the 4000?
Yes sure
When programming the Lift Car, in the properties section expand out "Low Level". In the section that says "Hardware Interface" go to the "search for hardware" bit (rhs) and choose the first relay for the first floor. The others will assign in order as per the 4000. It's not that hard but I can't find any information in the manual or on the Inner Range site that talks about lifts. There a bit about doors but not lifts.
Cheers
jonnyath (03-01-14),TheAlarmGuy (02-01-14)
Thank You very much!
The manual is terrible! Would love to see IR do another big Installer manual like they have done previously! There are so many things the current one just doesn't cover and they've really thrown us in the deep end with this panel!
Bookmarks