RAI moving again
On April 1.. RAI will leave the 4009MHz. New frequency Asia 5, 3805 Horizontal SR.. 4726.. FEC 2/3
Any word on TVE ??
| Look Here -> |
Rai
Lyngsat says its not free. Any idea if it will remain free????Originally Posted by B52
rai
working at moment and free
Not so... ...Yellow background means it Free To Air.
Thanks... Have several Elderly Italian ladies all ringing me due to their RAI not Working... Looks like I need to call in and Retune..
It is 5pm Wednesday melbourne time.
Can anyone confirm if Rai or TVE are not currently working at the moment?
Both working here in Sydney, signal quality on RAI is not as strong as it was on the other transponder
Looks like it's back to where it was a few years ago signal wise... anyone who put in a 1.8mtr dish is going to struggle!!
probably going to see lots of LNB's need work going from Vertical to Horizontal too
Last edited by beeblebrox; 02-04-14 at 06:35 PM.
Does anybody knows what happend with spanish TVE?
Cheers
Ribar
Last edited by Ribar; 03-04-14 at 08:35 PM. Reason: Wrong user name
TVE Internacional Asia has started free-to-air on Asiasat 5 (100.5 degrees east) - 4000, H, 28100 (Video pid 3553, audio pid 3554, pcr pid 3553).
Hi, any chance on pointing me in the right direction for my Italian grandparents. they live in Swan View Western Australia and both have "Strong" Satellite receivers.
Which satellite should I be pointing them at now?
After a little bit of help aswell, have done some reading but just trying to re-tune the parents unit to get it going again..
Go into the menu and do a blind scan, that should pick it up
TVE Symbol is 28125... (not 28100) Picture quality is bad. Fast motion has lots of tiling
Last edited by B52; 05-04-14 at 12:51 PM.
Can anyone give me some advice on how to realign my dish to AsiaSat5? I have no experience with C-Band!! Help!
_____________________________________________
Satellite is essentially the same it's just moved to a new transponder.
If your receiver doesn't have a blind scan function you need to manually add a new transponder
You need to add or edit an existing transponder and set the frequency to 03805 MHz, polarity to horizontal and the symbol rate to 4726 and if you have an old box that needs the fec set then set it to 2/3 . Once this is added you need to scan this transponder. The new rai will appear at the end of the channel list and you will need to delete the old one.
Sometimes a factory reset is best before you add the new transponder
If you do this and either still don't get it if the signal is breaking up you probably need some professional help, I have come across a few single polarity lnbs that need to be changed from vertical to horizontal
Duplicate post
Last edited by beeblebrox; 05-04-14 at 02:12 PM.
In the South East solar eclipse (outage) is on until the end of April.. At around 4:30 Asiasat 5 is effected, no signal for about 10 minutes
Looking at the dish, you can see the feedhorn shadow is in the center of the dish, as the earth turns the shadow exits the center and the satellite reception resumes.
Expect the same during September.
Thanks, the blind scan did the trick! Now one more question, is there only one Italian Channel?
Only one Italian channel free to air. You can get more on the web, just download the player from this link and you will get 12 free live channels in good quality, you just have to register.
Posting Permissions
Reply With Quote
Bookmarks