Help with a LAN CS setup

[Onefella]

It's been a while since I tried CS'ing and that was with Sidplayos2's software. I was wondering if someone could steer me in the right direction with a small LAN setup.

I have a MaterCRD2-PC running as a card reader in my main PC on my LAN. Greywolf 863b and Midnight both seem to connect to either a white card or a genuine sub in the reader no problems.

I have a Humax box in the loungeroom with a built-in season that connects to our home-theatre PC running XPSP3 connected to the LAN.

What client software should I use on the HTPC with Greywolf as the server?

[Dave001]

Use Greywolf 0.863b, it's both server and client.

Set the card to remote, and point it at the main PC, in the copy running on the HTPC, or just move the phoenix to the HTPC and only run one computer.

[Onefella]

Thanks, I did suspect GW could be the client as well, but didn't have any joy with my first attempts. Thought I must be missing something.

[Onefella]

just move the phoenix to the HTPC and only run one computer.

Wish I could. The MasterCRD2-PC is an internal card reader that takes the space of a floppy drive. No room on the HTPC.

I have an external CAS3+ that can be run in phoenix mode. I might give that a go.