Originally Posted by
AussieTruck
Hopefully this will help someone. After spending the weekend re-soldering the contacts for the LCD screen and messing about with the power connection I have the control panel unit running again. When I re-installed the control panel, after being powered off by disconnecting the power connector, it was not locked and I was in business. I was able to go through the settings and it looks pretty straight forward to me. I left it for the morning, planning to come back and work on during lunch, and the keypad is now locked.
With a lot of trial and error I have been able to UNLOCK the keypad. The process to unlock the keypad that worked for me was to press the following sequence of buttons:
If you get a multiple beep then try On/Off until it only does a single beep. This same sequence also serves to lock the keypad when it is unlocked. Thought it would be best to record this here as the only thread with any information on this system.
I plan to update the thread further with anything else I find out as I go along. My database is completely gone, not sure what happened to it, so I am going to manually setup all 23 4Ch Switches. This looks like it is going to be a tedious task requiring a helper to press the service button on each of the Switches so that I know what I am dealing with as all the switches have "Dymo" printed tape labels.
Cheers All.
Bookmarks