Change 404 to 396 and it should work.
Also change 0 to 12 when you enable it - that will make it work all the time.
Hey all
I have a bosch solutions 16 alarm panel and we are in the process of knocking a wall out in our bedroom. The problem is that we have a panic button installed on this wall so I need to disable zone 9 and then enable it again at a later date.
A few years back I needed to change over a detector in zone 5 and the alarm guy told me to enter the following;
away, 1607, away, 372, away, 15, stay, away, 960, away
I then changed the detector in zone 5 and he told me to enter the following;
1607, away, 372, away, 2, stay, away, 960, away
So I believe the installers code if 1607, is that correct??? So looking at the above if i want to disable zone 9 and then enable it once I have moved the panic button do I enter the following;
Disable zone 9 - away, 1607, away, 404, away, 15, stay, away, 960, away
Enable zone 9 - 1607, away, 404, away, 0, stay, away, 960, away
Thanks heaps!!
Look Here -> |
Change 404 to 396 and it should work.
Also change 0 to 12 when you enable it - that will make it work all the time.
Awesome, thanks for your help... Got it.. Cheers
Disable zone 9 - away, 1607, away, 404, away, 15, stay, away, 960, away
Enable zone 9 - 1607, away, 404, away, 12, stay, away, 960, away
Bookmarks