OMG, had the same problem Friday, same type of dome.
the are 3 >tiny< grub screws holding the base on located on the sides of the camera, about 5 mm back from where the base would mount to the wall.
Hi all, I have a dome camera which I'm having some trouble removing the base, is there some trick to removing it?
I've tried to unscrew the ring at the bottom, as this part has the mounting holes, but with no success, any ideas?
Thanks
Look Here -> |
OMG, had the same problem Friday, same type of dome.
the are 3 >tiny< grub screws holding the base on located on the sides of the camera, about 5 mm back from where the base would mount to the wall.
Any goody Tech always has one of these in their tool box for such items
When you do things right, people won't be sure that you have done anything at all
What tool did you use to remove your screws? My smallest allen key is 1.8 - 2mm which is too big!
U got a PCI capture card for that ?
Any good, let us know how it is :P
I ended up going to bunnings and getting a 1.5mm allen key. Darn small but it fits, and I managed to remove the grub screws!
Bookmarks