Good luck my boy dgtec died & Hills bought them. Could try for to ring them:
Does anyone have a link for to the manual that works (the only one that google finds is dead)?
I picked up a couple of them, but they are set to 1080i which none of my displays support.
Is there a way to change the video mode blind like on the DH-2000A Plus?
Look Here -> |
Good luck my boy dgtec died & Hills bought them. Could try for to ring them:
Try this sequence, it comes from dba forums:
"Another way to set your type of video output is to switch off the 7710 at the back and while holding the menu button on the stb switch the unit back on. Keep holding the menu button until you see E--1, E--2, E--3 or E--4. You move between the different outputs using the up/down arrows until you get the picture you want.
E1 is the component output. E2 is the vga 1080i. E3 is the dvi 1080i. E4 is the composite standard tv picture out 576i."
That worked, thanks.
After setting it to TV out as above 720p can be selected from the setup menu.
About 3 years and six months too late LOL
But you should stick a link up maybe others might be looking
When you do things right, people won't be sure that you have done anything at all
I have a scanned copy of the manual, anybody got a Delorian I can borrow?
Cheers
Ted (Al)
Goodonya Marty
When you do things right, people won't be sure that you have done anything at all
Bookmarks