Entech at .
You can also use Google to find others by using printed circuit board manufacturers Australia as the search terms.
E.g. (Click on the link).
Substitute your local state for the word, Australia (above) for hits closer to home.
Hi All
Wanting to first shop locally. Is there an Aussie manufacturer that produces the above mentioned ?. Looking for double sided boards for RF filter design. Specifically: 1oz/' copper, 0.032" thick dielectic with Er = 6.
Cheers
Look Here -> |
Entech at .
You can also use Google to find others by using printed circuit board manufacturers Australia as the search terms.
E.g. (Click on the link).
Substitute your local state for the word, Australia (above) for hits closer to home.
Thanks for the reply Tristen. I had an look at the Entech site a couple of nights ago when I was searching the web. I'll give them a ring tomorrow to see if they sell or make copper clad boards, but they don't appear to be the droids I am looking for going by their web site description.
J
PS/ Here is an example. I want to shop Aussie if I can:
Last edited by bodeplot; 01-07-15 at 11:45 PM.
"to see if they sell or make copper clad boards" ???
From Entech's website...
Entech Electronics Australia specialises in quality pcb fabrication ranging from single sided pcb fabrication to 26 layer pcb fabrication.
As a full service printed circuit board supplier, Entech Electronics offers a complete line of products and services, from low volume, quick-turn prototype manufacturing to medium and high volume production. We offer a complete capability to meet virtually any requirement, ranging from single-sided through to 26 layers.
Board Types
Single-Sided Rigid Boards
Double-Sided Rigid Boards with or without plated through-holes
Multilayers up to 26 layers with normal as well as blind and/or buried vias
HDI (High Density Interconnect) and Microvias
Single, Double-Sided and Multilayer Flexible Circuits
Flexi-Rigid Technologies
Multilayer RF/Microwave Boards
Substrates
High temperature FR4
Standard Epoxy Glass NEMA grade FR4
Exotic materials with higher maximum operating temperatures, lower coefficients of expansion and/or higher Tg levels
Polymide, Polyester or PET material
RF/Microwave materials including Teflon (Polytetrafluoroethylene-PTFE) and Duroid (GlassReinforced PTFE Composite), with capabilities of etching surface for improved bonding of through-hole plating and solder mask coating
Board Options
RoHS Compliance
Gold on Nickel Contact Fingers
CNC Routing
Scoring (V Grooving)
Panel Routing
Screen Printed Component Legends
Liquid Photoimageable Solder Mask Inks (LPSM)
Dry Film Solder Mask (DFSM)
Peelable Solder masks (For temporary protection from solder during wave soldering)
Screen Printed Conductive Inks (Carbon)
Bare Board testing including Surface Mount Pads
Board Finishes
Alpha Silver
Hot Air Leveled
Solder Mask Over Bare Copper (SMOBC)
Immersion Gold
Electrolytic Gold
OSP (Organic Solderability Preservative)
"droids" ???but they don't appear to be the droids I am looking for going by their web site description......
I contacted Entech. Unfortunately they do not wholesale what I need, but they gave me a contact. Thanks again . I suppose it never hurts to ask.
Bookmarks